Designs That Influenced The Styling Of The Victress S1 And Glasspar G2: Part 1 – The Jaguar XK120

thumb

Here’s A Side by Side Comparison Of The Jaguar XK120 With The Glasspar G2 and Victress S1A. You Can See Similarities In Style, Size, and Wheelbase.

Note: 

This is the first installment of a 3 part series of articles on “Designs That Influenced The Styling Of The Victress S1 And Glasspar G2.”  Here are links to the other parts of the story:

Click Here to Read Part 2

Click Here To Read Part 3

——————————–

Hi Gang…

What is the styling heritage of each of the vintage fiberglass cars we own? 

I think this is an important question when trying to understand the place our cars occupy in history – not just in the manner in which they were built but also in the ways each of our cars were styled.

This was the question that Erich Schultz and I have been discussing recently, and the car we first began focusing on was the Glasspar G2 designed by Bill Tritt.  Then we turned our attention to the Victress S1 designed by Doc Boyce-Smith and Hugh Jorgensen.   Each of these cars owes their design heritage, in part, to the Jaguar XK120 – and another earlier car which I think you’ll find surprising.

So……let’s examine the Jaguar first:

History And Styling of the 1948 Jaguar XK120:

The XK120 Has A Regal Appearance And Was Quite Fast Too. Both Tritt From Glasspar And Boyce-Smith / Jorgensen From Victress Were Greatly Influenced By Its Design.

 

The XK120 was introduced in 1948 and was an immediate hit with sports car enthusiasts across the world.  As reported by author Robert Cumberford in his book, “Auto Legends: Classics of Style and Design” in 2004:

“The XK120 was an astonishing tour de force for Jaguar when it appeared at the end of the 1940s in a country still suffering the privations of wartime long after victory had been declared…..The 3.4-litre capacity gave 160 BHP, an unheard-of figure at the time, and the performance – it was the fastest road car ever offered for sale in Britain – excited a nation living a grey, rationed life. 

Hollywood took to the XK120 in a big way: Humphrey Bogart and Clark Gable were among the stars who bought them.  Nothing on the road was more dramatic than the XK120….More than anything else, the XK120 established Jaguar as a world marque.  At its wheel drivers such as Stirling Moss and Formula One world champion Phil Hill showed what it could do.  It was, and is, a masterpiece.”

This was the automobile that “set the bar” in styling and performance, and within the fiberglass world of the 1950’s, two specific companies were significantly influenced by its design:  Glasspar and Victress. 

Here’s A Rear Shot Of The Jaguar XK120. It Was A Beautiful Streamlined Design.

The Jaguar XK120’s Influence on Glasspar:

Numerous interviews and magazine articles have confirmed Bill Tritt’s admiration and respect for the XK120, and how he used the design to help shape and contour the Glasspar G2 body.   When you compare the two bodies, you take note of many similar features:

  • Slab-sided or “flat” sides of body
  • A gradual descent of the fender line from the front just to the rear of the door where it “kicks up” again over the rear wheel
  • Identical wheelbase of 102”
  • The separation of the hood line from the fender line thru a gradual fall and rise of the shapes– still keeping the hood area separate from the fender line

There were notable differences such as:

  • The hood or front/center of the Jaguar was taller than the tops of the fenders while in the G2 the hood area plunged downward toward the lower front grille
  • The G2 is a bit wider at 55 inches for track (center line to center line of front tires).  The XK120’s track is 51 inches

Overall, the G2 was a nicely designed, well-built styling alternative to the Jaguar XK120, and the heritage of Tritt’s design is easily seen (and proudly reflected) in the origins of the Jaguar.

The Jaguar XK120’s Influence on Victress:   

Although The Size and Profile Of The 3 Cars Above Are Similar, The Styling Treatment For Each Front End Differs Radically.

So let’s turn our attention toward the Victress S1 designed by Doc Boyce-Smith and Hugh Jorgensen. 

Recently I interviewed Merrill Powell from Victress about his memory of the design of this car.  He remembers the following:

  • Doc’s intention in designing the S1 was to “out Jag the Jaguar XK120”
  • The Jaguar had a vertical grille, so Doc and Hugh created a horizontal grille
  • The Jaguar was slab-sided so Doc and Hugh rounded the sides of the Victress S1
  • Doc and Hugh defined the rear fender more distinctly, brining the fender line further down toward the rear and bottom of the door

I’ve posted the interview with Merrill Powell below.  It is 2 minutes long.  Click on the triangle below to listen to Merrill’s thoughts and memories concerning the design of the Victress S1 back in 1952:

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

Merrill also remembered that the S1’s wheelbase was – like the Glasspar G2 – was identical to the Jaguar XK120.  Victress shortened the wheelbase to 99” inches in late 1953/early 1954 to match the newly released Kurtis KK500 chassis that Frank Kurtis had just designed and offered for sale.  Also, like the G2, the track of the Victress S1 was wider to accommodate a standard American chassis/suspension width.

When You View The Profile Of the Jaguar XK120, You Can See The Clear Influences It Had On The Glasspar G2 and The Victress S1.

Technical Specifications of the Jaguar:

For those of you interested, here are the technical specifications of the Jaguar XK120:

  • Engine: Cast iron, inline 6, 3442 cc (3.4 litre)
  • 182.5 PS (180 bhp) (134.2 kW) @ 5300 rpmTransmission: 4 speed manual
  • Front Suspension:  Independent Double wishbones with torsion bar, telescopic shock absorbers
  • Rear Suspension/Axle: Live axle with half elliptical springs, Girling hydraulic shock absorbers
  • Brakes: Girling hydraulic drums
  • Weight: 2855 lbs
  • Top Speed: 132.89 mph (stock)
  • Wheelbase: 102 inches
  • Front Track: 51 inches
  • Rear Track: 50 inches

Summary:

So the heritage of both of these well-known fiberglass cars (Glasspar G2 and Victress S1) is nicely revealed in the birth of the 1948 Jaguar XK120.  But was this the only influence on stylists of the 1950’s – including Bill Tritt, Doc Boyce-Smith, and Hugh Jorgensen?  Erich Schultz thinks not, and recently introduced me to another car which appeared much earlier than the XK120, and that’s the 1939 BMW 328 Mille Miglia Roadster.  And….we’ll discuss this BMW in the near future.

Hope you enjoyed the story, and until next time…

Glass on gang…

Geoff

Note:  Click on the following link to view all stories on:  Victress

Note:  Click on the following link to view all stories on:  Glasspar

——————————————————————–

Click on the following link to View or Post Your Comments: FIBERGLASS FORUMS

(remember you’ll have to register to post on the forums – but you register just once and can post after you sign on)

Don’t Forget….we appreciate any and all donations to our Forgotten Fiberglass website.  Your donations help defray production costs.  Click on the following link to make a donation via Paypal.  You truly will become a welcomed friend of Forgotten Fiberglass:  http://tinyurl.com/6e3ql5t

Click on the Images Below to View Larger Pictures

——————————————————————-


Comments

Designs That Influenced The Styling Of The Victress S1 And Glasspar G2: Part 1 – The Jaguar XK120 — 1 Comment

  1. In many respects the Glasspar G2 is closer to the first series Nash Healey that was designed in 1950. It is about the same size as it used American Nash parts and some Donald Healey designed bits he did for his first post was sports cars.

    The Victress is much closer to the BMW – Jaguar 120 styling.

    The chassis size specs come very close to the Formula Junk class Indy cars of the early 1930s such as Studebaker, Hudson and Buicks.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

CommentLuv badge